Bulker Body
Product Specifications
CUBE CAPACITY
36/40/45/48/50/52 Cubic Mtr.
BODY MATERIAL
Shell -4mm. Thick domex/St52.3 & dish end 5mm. St52.3
FOR CHASSIS
Main chassis fabricated type with 5 mm. thick domex/8mm. St52.3 as l adder type construction with cross member. The structure shall ensure maximum load bearing capacity with low unladen weight construction will ensure maximum torsional stability, Cross members-rolled or folded IS2062 or ST-52.3
KING PIN
2'' kingpin Equivalent to IS 6763 Part I provided.
LANDING LEG
Two speed type front supports shall be provided, Make: York or Equivalent
DISCHARGE
Rear via bottom
LOADING
3 X 500 mm. diameter main hole, maximum working pressure 165 to 180 KPA
PRESSURE GAUGE
100mm diameter 0-10 Kg/Cm2 fluid intersect
RELIEF VALVE
A relief valve will be installed in the vessel in accordance with IS-2526 class 3 requirements
AXLE
3 Nos. 13T, 16T Axle Shall be provided. Make: York or equivalent
BRAKES
Twin line air brake system coupled to tractor brake system. Trailer brakes are actuated from tractor. T24 brake chamber shall be provided on all axles. Parking brake shall be manually actuated. QRV and LQRV shall be provided for brake efficiency, ABS & Non-ABS axle are as customer choice
PAINTING
Surface is cleaned by shot blasted & one coat of primer and one coat of finish quick dry paint to color of customer choice
